Navigate here using a Web MIDI-compatible browser (such as Chrome, Edge, Firefox, Brave, Opera, or Vivaldi; Safari is not supported). Connect MIDI cables from your MIDI interface’s MIDI Out port to your Midi2CV Mk2’s MIDI In port, and from the module’s MIDI Out back to your interface’s MIDI In. Next, select your connected MIDI In and Out ports on the page and click the “Query device” button — and every setting, LFO/EG parameter, and tuning data on the Midi2CV Mk2 module is right there in your browser, ready to tweak.

What’s available:

• Device settings & options — device mode, CC number, clock divider, pitch bend range, velocity and aftertouch curves, poly voice count, and strobe width, plus toggles for strobe gate, strobe/gate inversion, poly port mapping, and soft MIDI THRU.

• LFO control — waveshape, rate, MIDI clock sync, phase reset, fade-in, amplitude, output polarity, distortion, and steppyness, all with live value feedback as you turn the dials.

• EG control — attack, hold, decay, sustain, and release times, auto-gate width, segment curve shape, retrigger and loop modes, clock sync, and output invert.

• Tune data management — pull calibration data straight from a connected device, load and save .tunedata files, and pick from a library of ready-made calibration curves — each file’s description now shows right in the UI.

• Firmware updates over MIDI — send the latest firmware to the device right from the browser.

Every value field is mouse-scrubbable: click and drag up or down to dial a number in, no typing or precise clicking required. Double-click a field (or hit Space) to snap it back to its default, and the arrow keys still work for fine adjustments.

Every setting update is sent to the device immediately, so you can dial things in by ear. Query your device once to pull its current configuration and tweak away.